NEC N8400-086F, User Manual

Page: 262 / 294

B-44 Installing the Operating System
SETTING WOL
Refer to the following procedure to enable WOL.
When the system is Windows Server 2008 64-bit (x64) Edition / Windows Server 2008
32-bit (x86) Edition
1.
Start Device Manager.
2.
Point to [Network adapters] and double click [Intel(R) 82576 Gigabit Dual Port Server
Network Connection]/[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2]
to open the adapter [Properties].
3.
Click [Power Management] tab and change setting in [Wake On LAN] according to the
following list.
Setting item Default setting Change setting
"Wake On Directed Packet" ON OFF
"Wake On Magic Packet" ON OFF
"Wake on Magic Packet from power
off state" OFF ON
NOTES:
„
[Power Saver Options] setting is not necessary to change.
„
Above setting will maintained until manually resetting are executed.
IMPORTANT:
The parameters of [Wake On LAN] will not exist, if
the network port are not available of WOL.
4.
Click [OK].
5.
Reboot the system.
IMPORTANT:
„
WOL (Wake On Lan) are only available on system Shutdown mode.
„
WOL (Wake On Lan) is not available on system Hibernate and Sleep
mode.