NEC N8400-086F, User Manual

Page: 184 / 294

8-26 Troubleshooting
RECOVERY FOR Windows SYSTEM
If any file necessary for running the OS is damaged, use the following procedures to recover the
system.
IMPORTANT:
„
Make sure that the keyboard, display unit, optical disk drive, and
floppy disk drive are connected to the CPU blade.
„
After recovering the system, see "Updating the System" in Chapter
5 and be sure to update the system.
Also, you need to update all the drivers after the system update. For
more information, see "Installing and Setting Device Drivers" in
Chapter 5.
„
If the hard disk drive can not be recognized, you can not recover the
system.
„
Make keyboard entry only while the USB floppy disk drive is not
accessed (the access lamp is being off).
For Windows Server 2008
If the system fails to start for some reason, rebuild the system using the recovery console. Note that
this method is recommended for only users and administrators who have a thorough knowledge of
the recovery console.
For more information, refer to Online Help.
For Windows Server 2003 x64 Editions
If the system fails to start for some reason, rebuild the system using the recovery console. Note that
this method is recommended for only users and administrators who have a thorough knowledge of
the recovery console.
For more information, refer to Online Help.
For Windows Server 2003
If the system fails to start for some reason, rebuild the system using the recovery console. Note that
this method is recommended for only users and administrators who have a thorough knowledge of
the recovery console.
For more information, refer to Online Help.