NEC N8400-086F, User Manual

Page: 178 / 294

8-20 Troubleshooting
Problems with Express Setup
Following message appeared when you tried to install Express Setup to the hard disk drive
that has smaller capacity than the specified partition size:
The creating of the partition was failed.
The process can not be continued. The process was stopped.
O K
→
Cannot continue the setup.
Specify smaller partition size than the capacity of connected hard disk drive, and
then retry the setup.
Specified to join the Domain, but the system is installed as Workgroup.
→
When the setup fails to join the Domain during the installation, it will install the
system as Workgroup. Open [System] in Control Panel to specify joining the Domain.
Unable to specify the details of Network adapter.
→
In Express Setup, you can not specify the details of Network adapter. Specify them
from Control Panel after starting Windows.
There is unused area on the lead of HDD.
‰
Did you install Windows Server 2003?
→
If you had installed Windows Server 2003 by Express Setup, the head 8MB of
HDD may be unused area.
It is not a problem in operating the system.