NEC N8400-086F, User Manual

Page: 140 / 294

6-12 Installing and Using Utilities
8.
Specify the installing medium and the Windows system partition.
[Specify medium / Partition] steps are displayed. Confirm the parameters, modify if
necessary, and then click [Next].
IMPORTANT:
„
If you use iSCSI environment, "Windows Server 2008 Server Core
Installation" is not supported.
In this case, select "Full Installation".
„
About partition size
– Specify the partition size larger than required minimum size for
OS installation.
– Do not specify larger partition size than the capacity of
connected hard disk drive.
– You can not specify a logical drive larger than 2,097,144MB at
RAID system.
„
If you select "Create a new partition" at "Windows system drive
settings", the contents of the hard disk will be all deleted.
„
If "Use existing partitions" is selected, EXPRESSBUILDER
installs the Operating System to the 1st partition (1st partition is
deleted). The data in the other partition is kept if the system has
two or more partitions. (See the figure below.)
First
Partition
Deleted
Second
Partition
Retained
Third
Partition
Retained
„
You can not re-install the system with the existing partition that is
upgraded to Dynamic Disk remained. Do not select "Use existing
partitions" at "Windows system drive settings".