Motorola DIMETRA MTS 2, Installation, Configuration And Basic Service Manual

Page: 310 / 517

MTS - Con
fi
guring Cooling Fans Chapter 8: Site Controller
MTS - Configuring Cooling Fans
Procedure 8-14 needs to be repeated each time a Site Controller has been replaced.
Procedure 8-14 MTS - How to Configure the Cooling Fans
1
Make sure you are logged on to the Site Controller.
2
To get the current fan con
fi
guration, type
psu 1 get fan_config
and press
Enter
.
If applicable, repeat for PSU 2.
3
To set new fan con
fi
guration, use the
psu # set fan_config
command.
Examples:
psu 1 set fan_config 1 1 1
to de
fi
ne three fans present on PSU 1.
psu 2 set fan_config 0 0 0
to de
fi
ne no fans present on PSU 2.
4
If a redundant Site Controller is available in the system, repeat step 3 on the second Site
Controller while it is active.
5
Return to Process 8-1, "MTS – Replacing Site Controller," on page 8-19 .
MTS - Loading Ki's Into MTS
Process 8-4 MTS - Loading Ki's Into MTS
1
Refresh Ki's. See "MTS - Refreshing Ki's for the MTS" on page 8-35 .
2
Connect KVL to the AuC. See "MTS - Connecting KVL to the AuC" on page 8-35 .
3
Download Ki's from AuC to KVL. Use local or remote connection. See:
•
"MTS - Downloading Ki's from the AuC to KVL (Locally)" on page 8-36 .
•
"MTS - Downloading Ki's from the AuC to KVL (Remotely Using GSM)" on page 8-36 .
4
Check the Inventory in KVL. See "MTS - Checking the Inventory in KVL" .
5
Download Ki's from KVL to Site Controller/BRC. See "MTS - Downloading Ki's from KVL to
the Site Controller/BRC" on page 8-37 .
6
Upload site receipts (locally or remotely). See
•
"MTS - Uploading the Site Receipts (Locally)" on page 8-38
•
"MTS - Uploading the Site Receipts (Remotely using GSM)" on page 8-38
8-34
6802800U74-N September 2009