Motorola DIMETRA MTS 2, Installation, Configuration And Basic Service Manual

Page: 89 / 517

MTS 2 and MTS 4 Installation, Con
fi
guration and Basic Service Manual Mounting a Mounting Plate
Procedure 4-2 How to Mount a Mounting Plate
1
Ensure that the mounting plate has been correctly positioned in the equipment room, see
Figure 3-2 for MTS 2, Figure 3-4 for MTS 4, and Figure 3-6 for Expansion Cabinet.
2
Use the mounting plate as drilling template or mark the
fl
oor according to the dimensions shown
in Figure 4-8 and Figure 4-9 . Remember to keep the 13 mm distance behind the mounting
plate. Four 12 mm holes are pre-drilled. Additional holes may be drilled in the mounting plate
where required.
Figure 4-8 MTS 2 – Drill Hole Position for the Mounting Plate
6802800U74-N September 2009
4-13