Motorola DIMETRA MTS 2, Installation, Configuration And Basic Service Manual

Page: 297 / 517

MTS 2 and MTS 4 Installation, Con
fi
guration and Basic Service Manual MTS - Viewing and Editing Con
fi
guration File
MTS - Viewing and Editing Configuration File
Procedure 8-6 MTS - How to View and Edit the Configuration File
1
To view the previously uploaded con
fi
guration
fi
le, select Close Connection and observe that
your chosen
fi
le name is displayed at the top of the menu window.
2
Select Personality menu, select Modify and
fi
ll out the Site Title and Version boxes as
applicable (optional).
3
Enter the various con
fi
g
fi
le
fi
elds to view the MTS parameters and make any appropriate
changes. Click OK .
4
Under the File menu, select Save .
MTS - Replacing Site Controller FRU
Table 8-8 Site Controller - FRU
Part Number Description
WALN4339 Site Controller - MTS 2/ MTS 4
See Appendix B for list of Periodic Maintenance Inspections.
Please refer to Appendix C, "Static Precautions and ESD Strap" before
proceeding with replacement process.
Procedure 8-7 MTS - How to Replace Site Controller
1
Disconnect the power cables to the MTS Power Supply Units.
If con
fi
guration with non-redundant power connection, the MTS Power Supply Unit
can be switched off as an alternative to removing the cables.
Shock Hazard. The MTS contains dangerous voltages which can cause
electrical shock or damage to equipment. Turn off the MTS and remove
the power cabling before servicing this equipment. Make sure all power
is off to prevent accidental contact with high energy and injury to
personnel.
2
Wear an ESD strap and connect its cable to a veri
fi
ed good ground. This strap must be worn
to prevent ESD damage to any components.
3
Tag and disconnect all other cabling from the Site Controller.
6802800U74-N September 2009
8-21