Synchronizing Non-Volatile Memory (NVM) Regions
Chapter 6: Con
fi
guration and Testing
Synchronizing Non-Volatile Memory (NVM) Regions
After introducing major changes in the Non-Volatile Memory (NVM) settings it is recommended to
synchronize NVM regions using the commands described below. Each physical NVM object has two
copies of its contents called the working region and the default region. The working region is used
for normal operation, while the default region is a backup from where the settings are recovered in
case of a memory fault (incorrect checksum) detected in the working region.
In order to synchronize the default region with the working region, use the following
commands at the command prompt:
•
sfcp -ocontrol -sworking -ddefault
•
sfcp -oex1 -sworking -ddefault
•
sfcp -opa1 -sworking -ddefault
•
sfcp -orxch1 -sworking -ddefault
6-30
6802800U74-N September 2009
Summary of Contents for DIMETRA MTS 2
