Motorola DIMETRA MTS 2, Installation, Configuration And Basic Service Manual

Page: 304 / 517

MTS - Con
fi
guring E1 Links Chapter 8: Site Controller
MTS - Configuring E1 Links
Syntax for .e1con
fi
g MMI command:.
.e1config [-portNo -link -crc -ts16Skip -clock -siteLink -channel
-tsPattern -DI -sat -display -?]
•
-portNo = assign physical E1 port to channel
•
-link = con
fi
gure options related to physical E1 line/interface
•
-crc = enable/disable CRC4
•
-ts16Skip = use/not use E1 16-th time slot
•
-clock = select Clock source
•
-siteLink single|dual = select single E1 or dual E1 sitelink con
fi
guration
•
-channel = creates and con
fi
gures Logical E1 circuit by assigning single or
multiple E1 timeslots to a particular physical E1 port
•
-tsPattern 1..31 = assign time slots to a proper channel
•
-DI on|off = turn of/off Drop & Insert functionality. Is always off for star con
fi
guration,
but must be enabled for ring/chain con
fi
gurations
•
-sat on|off = set link as satellite one
•
-display 1|2|all = display E1 con
fi
guration
•
-? = display help for this command
Table 8-9 Slots Configured on the E1
No. of BR's in Site Slots Configured on the E1
1 1
2 2
3 2
4 3
5 3
6 4
7
4
8 5
8-28
6802800U74-N September 2009