Motorola DIMETRA MTS 2, Installation, Configuration And Basic Service Manual

Page: 296 / 517

MTS - Backing Up the Site Controller Con
fi
guration Chapter 8: Site Controller
Procedure 8-4 MTS - How to Set Up a Terminal (Continued)
4
Connect a Straight Through Ethernet cable between the LAN port on PC and the Service Access
port on the front of the Site Controller. Change your PC IP address to 10.0.253.100, mask
255.255.255.0, gateway 10.0.253.1.
In case of redundant Site Controller con
fi
guration where second SC (upper) is active
will use subnet .254.
5
In main window, select Connection and select Connect Telnet New... .
Result: The Telnet Connection Settings window is opened.
6
Specify connection settings of 10.0.253.1 in the 'Site IP' box and click OK to establish a
connection.
7
Press
Enter
and at the
User Name
prompt, enter any user name consisting of at least three
characters.
8
Enter the
fi
eld password when prompted.
Result: You should see an SC> prompt.
The higher level engineering password may also be used and will return an SC>
prompt.
9
Continue to "MTS - Backing Up the Site Controller Con
fi
guration" on page 8-20 .
MTS - Backing Up the Site Controller Configuration
Procedure 8-5 MTS - How to Back Up Current MTS Configuration to PC
1
Select Upload Con
fi
guration in TESS application.
Result: Window opens showing the Site Controller con
fi
guration
fi
les for upload.
2
Ensure that the
fi
le that is set to current and next (as indicated by + + ) is highlighted in blue
and click OK .
You may choose to upload the non-current
fi
le by selecting it.
3
Observe the Site Controller and BR
fi
le transfer and when complete, con
fi
rm the window showing
transfer status displays
Transferred No Errors
for all
fi
les transferred then click OK .
4
When prompted to save the uploaded con
fi
guration
fi
le, use an appropriate name and click OK to
save the con
fi
guration
fi
le in the default folder.
You may use the browser to save the con
fi
g
fi
le to a speci
fi
c folder if preferred.
8-20
6802800U74-N September 2009