D-Style Motors: Demo or Development System
D-Style Motors: Demo or Development System
CAUTION:
This configuration is designed for development, training or demo
purposes only. It is not intended for use in an industrial (manufacturing)
environment.
CBLSM1-DEMO
PWR116V
CBLAC4
D-Style Motors: RS-232 Through USB
USB232485
B
KITUSB232485
CBLSM1-xM
PS24V8AG-110
or
PS42V6AG-110
Adding a USB
Adapter
Moog Animatics sells a USB to Serial adapter (PN
KITUSB232485), which is used on PCs that don't
have a built-in serial port. The adapter allows you to connect from an available USB port to the serial
interface on the SmartMotor. The adapter simply connects between the USB port and the serial cable.
When the adapter is used, it is recommended that you use the Microsoft Windows Device Manager's
Port Settings tab to change the port's communications buffers to minimum. This allows the operating
system to immediately notify the SMI software when data is being received from a SmartMotor.
Otherwise, you may experience intermittent interruptions in communications.
To change the USB
port settings:
1. From the Windows Desktop, open the Device Manager by selecting:
Start > Control Panel > Device Manager
Moog Animatics Class 5 SmartMotor™
Installation and Startup Guide,
Rev. I
Page 37 of 76
