Using the Address Motors Feature
After the process has completed, the SMI software shows the found motors in the Configuration
window under the corresponding communications port. Each motor is represented by a motor icon; the
motor's address and firmware version are shown next to the motor icon.
Configuration Window Showing Found/Addressed SmartMotor
Using the Address Motors Feature
This method assumes that there are motors connected to the specified port and will simply address
each one that it finds.
NOTE:
This method will address (or re-address) every motor. If you pre-addressed your motors
before connecting them, those motor addresses could be changed by this process.
To use the Address Motors feature, in the Configuration window of the SMI software, right-click the
desired communications port and select Address RS-232 Chain from the menu.
Selecting the Detect Motors Feature
Moog Animatics Class 5 SmartMotor™
Installation and Startup Guide,
Rev. I
Page 57 of 76
