Mitsubishi NZ2GFCF-D62PD2, User Manual

Page: 273 / 304

271
APPENDICES
A
Appendix 3 Details of R
emote Buffer
Memory Addresses
(8) Module-based parameter data (address: 0124
H
to 0125
H
, 0144
H
to 0145
H
)
Address
Name Description Default
CH1 CH2
0124
H
0144
H
Counter format
• Set the counter format.
• The following shows the setting range.
0: Linear Counter
1: Ring Counter
• The reflection timing of the setting value
When Initial data setting request flag (RY9) is turned off then on
0
0125
H
0145
H
Phase Z setting
• Set the trigger condition to replace a count value with the preset value by
CH  Phase Z input terminal (Z1, Z2).
• Set whether to turn on CH  External preset/replace (Z Phase) request
detection (RX23, RX3B) or not when a count value is replaced with the
preset value by CH
 Phase Z input terminal (Z1, Z2).
• While CH  Z phase (Preset) trigger setting (address: 0125
H
.b0 to b1,
0145
H
.b0 to b1) is on, CH  External preset/replace (Z Phase) request
detection setting (address: 0125
H
.b4, 0145
H
.b4) is disabled and CH 
External preset/replace (Z Phase) request detection (RX23, RX3B) is
always off.
• The following shows the setting range.
1) Z phase (Preset) trigger setting
00: Rising
01: Falling
10: Falling
11: During ON
2) External preset/replace (Z Phase) request detection setting
0: ON at detection
1: Not ON at detection
• The reflection timing of the setting value
When Initial data setting request flag (RY9) is turned off then on
0000
H
b15 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14
0 0 0 0 0 0 0 0 2) 0 0 0 1) 0 0
0 (fixed) 0 (fixed)