Mitsubishi NZ2GFCF-D62PD2, User Manual

Page: 271 / 304

269
APPENDICES
A
Appendix 3 Details of R
emote Buffer
Memory Addresses
(5) Module-based parameter data (address: 0104
H
to 0105
H
)
(6) Module-based parameter data (address: 0120
H
to 0121
H
, 0140
H
to 0141
H
)
Address
Name Description Default
CH1 CH2
0104
H
Cam switch output
unit assignment
setting
• Set an extension output module to be used with the cam switch function.
• The following shows the setting range.
0: No Assignment
1: Stage 1
• The reflection timing of the setting value
When Initial data setting request flag (RY9) is turned off then on
0
0105
H
Cam switch output
channel assignment
setting
• Set channels to be compared for the outputs of the cam switch function.
• The following shows the setting range.
1) Cam switch output 1 channel assignment setting
2) Cam switch output 2 channel assignment setting
: :
15) Cam switch output 15 channel assignment setting
16) Cam switch output 16 channel assignment setting
• The reflection timing of the setting value
When Initial data setting request flag (RY9) is turned off then on
0000
H
Address
Name Description Default
CH1 CH2
0120
H
0140
H
Operation mode
setting
• Set the operation mode for channels.
• The following shows the setting range.
0: Normal Mode
1: Frequency Measurement Mode
2: Rotation Speed Measurement Mode
3: Pulse Measurement Mode
4: PWM Output Mode
• The reflection timing of the setting value
When Initial data setting request flag (RY9) is turned off then on
0
0121
H
0141
H
Count source
selection
• Set the count source.
• The following shows the setting range.
0: A Phase/B Phase
1: Coincidence Output 1
2: Coincidence Output 2
• When CH  Count source selection (address: 0121
H
, 0141
H
) is set to
Coincidence Output 1 (1) or Coincidence Output 2 (2), pulses are counted
up at the rising edge of the following signals.
Normal mode: Coincidence output 1 to 2 (RX10 to RX11)
PWM output mode: Coincidence output 1 to 2 terminals (EQU1 to EQU2)
• The reflection timing of the setting value
When Initial data setting request flag (RY9) is turned off then on
0
b15 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14
9) 16) 15) 14) 13) 12) 11) 10) 1) 2) 3) 4) 5) 6) 7) 8)
0: CH1
1: CH2