Mitsubishi NZ2GFCF-D62PD2, User Manual

Page: 220 / 304

218
 673
H
Moderate error
CH

ON
width/Cycle
setting error
(PWM output)
The value in CH  Cycle
setting (PWM output)
(RWw20 to RWw21,
RWw38 to RWw39) is
smaller than the value in
CH
 ON width setting
(PWM output) (RWw1E to
RWw1F, RWw36 to
RWw37).
 indicates the channel
where settings are
incorrect.
If CH  PWM
output start
command
(RY26, RY3E) is
turned off then
on:
*12
If CH  ON
width setting
change request
(PWM output)
(RY35, RY4D) is
turned off then
on:
*1
*3
Set the values that satisfy the
condition "CH

ON width
setting (PWM output) (RWw1E
to RWw1F, RWw36 to RWw37)
≤ CH

Cycle setting (PWM
output) (RWw20 to RWw21,
RWw38 to RWw39)", and
perform either of the following
operations.
• If CH  PWM output (RX26,
RX3E) is off, turn off then on
CH
 PWM output start
command (RY26, RY3E).
• If CH

PWM output (RX26,
RX3E) is on, turn off then on
CH
 ON width setting
change request (PWM
output) (RY35, RY4D).
 810
H
Moderate error
CH  Operation
mode setting
error
A value other than 0 to 4 is
set in CH
 Operation
mode setting (address:
0120
H
, 0140
H
).
 indicates the channel
where settings are
incorrect.
*13
Set CH  Operation mode
setting (address: 0120
H
,
0140
H
) to a value between 0
and 4, and turn off then on
Initial data setting request flag
(RY9).
 811
H
Moderate error
CH  Count
source selection
setting error
The setting in CH  Count
source selection (address:
0121
H
, 0141
H
) is in either
of the following cases.
• If the value in CH 
Operation mode setting
(address: 0120
H
,
0140
H
) is 0, a value
other than 0 to 2 is set.
• If the value in CH 
Operation mode setting
(address: 0120
H
,
0140
H
) is 1 or 2, a value
other than 0 is set.

indicates the channel
where settings are
incorrect.
*13
Take either of the following
actions on CH
 Count source
selection (address: 0121
H
,
0141
H
), and turn off then on
Initial data setting request flag
(RY9).
• If the value in CH 
Operation mode setting
(address: 0120
H
, 0140
H
) is 0,
set a value between 0 and 2.
• If the value in CH 
Operation mode setting
(address: 0120
H
, 0140
H
) is 1
or 2, set 0.
Error code
(hexadecimal)
Classification Error name
Description and
cause
Operation of when an error
occurs
Action
Error CH
The other
CHs