Mitsubishi NZ2GFCF-D62PD2, User Manual

Page: 280 / 304

278
(17)Station-based control data (address: 1002
H
)
● When Parameter area initialization command (address: 1002
H
) is executed, the following remote input signals and
remote registers are not cleared. (Note that the following are the target data to be cleared by Initial data setting request
flag (RY9).)
• Warning status flag (RX7)
• Error status flag (RXA)
• CH
 Error status (RX36, RX4E)
• CH  Warning status (RX37, RX4F)
• CH  Latest error code (RWr22, RWr3A)
• CH  Latest warning code (RWr23, RWr3B)
● When initialization of the parameter information and the extended parameter information is completed, Initial data
processing request flag (RX8) turns on. Set parameters using Initial data setting request flag (RY9) and remote registers
using Initial data processing completion flag (RY8).
Address Name Description Default
1002
H
Parameter area
initialization
command
• The parameter information and the extended parameter information stored in
the remote buffer memory and the nonvolatile memory are initialized by this
command.
• The following shows the setting range.
• When Parameter area initialization command (address: 1002
H
) is set to
Commanded (1), the parameter information and the extended parameter
information stored in the remote buffer memory and the nonvolatile memory
are initialized and Parameter area initialization completed (address: 1003
H
)
changes to Initialization is completed (1).
0000
H
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 (fixed)
b15 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14
0: Not
commanded
1: Commanded
Controlled by the high-speed counter module
Parameter (remote
buffer memory and
nonvolatile memory)
Parameter area
initialization command
(address: 1002
H
)
Parameter area
initialization completed
(address: 1003
H
)
Controlled by the program
Set parameter Default value
Not commanded (0) Not commanded (0) Commanded (1)
Not
performed (0)
Not performed (0)
Completed
(1)