Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 151 / 403

Multi information display
6-18 Instruments and controls
6
E00531601207
ECO score indicates the points you have
scored on fuel-efficient driving by the num-
ber of leaves as follows:
[When the operation mode is ON]
The display shows the score you achieved in
the last several minutes.
[When the operation mode is put in OFF]
The display shows the overall ECO score the
function has counted from the time when the
operation mode is set to “ON” to the time
when it is set to “OFF”.
E00522702531
The “Display language”, “Temperature unit”,
“Fuel consumption unit”, and “Average fuel
consumption and speed reset method” etc.
setting can be modified as desired.
1. Stop the vehicle in a safe place.
Firmly apply the parking brake, and press
the electrical parking switch and shift to
“P” (PARK) position.
2. Lightly press the multi information dis-
play switch a few times to switch the
information screen to the function setting
screen.
Refer to “Information screen” on page
6-9.
3. Press and hold the multi information dis-
play switch for about 2 seconds or more to
switch from the setting mode screen to the
menu screen.
 When there is no energy flow
NOTE
 During charging, the energy flow display for
charging is displayed. For details, refer to
“Energy flow display during charging” on
page 3-26.
ECO Score
Changing the function settings
ECO drive level
Low High
CAUTION
 For safety, stop the vehicle before operating.
While driving, even if you operate the multi
information display switch, the function set-
ting screen is not displayed.