Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 170 / 403

Indicator lamp, warning lamp, and information screen display list
Instruments and controls 6-37
6
 The brake auto hold system does not turn
off because the brake pedal is not pressed.  Depress the brake pedal more firmly than
usual with the right foot. Then, press the
brake auto hold switch.
Refer to “Brake auto hold” on page 7-37.
 There is a fault in the engine oil circulation
system.  Immediately stop the vehicle in a safe
place. We recommend you to have it
checked.
Refer to “Oil pressure warning display” on
page 6-54.
 There is a fault in the Supplemental
restraint system (SRS) airbag or the pre-
tensioner system.  We recommend you to have it checked,
immediately.
Refer to “SRS warning lamp/display” on
page 5-31.
 There is a fault in the active stability con-
trol (ASC).  We recommend you to have it checked.
Refer to “Active stability control (ASC)”
on page 7-45.
 There is a fault in the Hill start assist.  We recommend you to have it checked.
Refer to “Hill start assist” on page 7-40.
 The outside temperature is 3 °C (37 °F) or
less.  Be careful of ice on the road.
 The road can be icy even when this warn-
ing is not displayed, so drive carefully.
Screen Cause Solution (Reference)