Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 373 / 403

Tyres
11-10 Maintenance
11
E01001405020
*: Above 160 km/h
Check the tyre inflation pressure of all the tyres while they are cold; if insufficient or excessive, adjust to the specified value.
After the tyre inflation pressure has been adjusted, check the tyres for damage and air leaks. Be sure to put caps on the valves.
E01001801970
Check the tyres for cuts, cracks and other
damage. Replace the tyres if there are deep
cuts or cracks. Also check each tyre for
pieces of metal or pebbles.
The use of worn tyres can be very dangerous
because of the greater chance of skidding or
hydroplaning. The tread depth of the tyres
must exceed 1.6 mm in order for the tyres to
meet the minimum requirement for use.
Tread wear indicators will appear on the sur-
face of the tyre as the tyre wears, thereby
indicating that the tyre no longer meets the
minimum requirement for use. When these
wear indicators appear, the tyres must be
replaced with new ones.
When replacement of any of the tyres is nec-
essary, replace all of them.
Tyre inflation pressures
Tyre size Front Rear
225/55R18 98H 2.4 bar (35 PSI) [240 kPa]], 2.6 bar (38 PSI) [260 kPa]*
Wheel condition
1- Location of the tread wear indicator
2- Tread wear indicator
CAUTION
 Always use tyres of the same size, same
type, and same brand, and which have no
wear differences. Using tyres of different
size, type, brands or degree of wear, will
increase the differential oil temperature,
resulting in possible damage to the driving
system. Further, the drive train will be sub-
jected to excessive loading, possibly leading
to oil leakage, component seizure, or other
serious faults.