Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 228 / 403

S-AWC (Super All Wheel Control)
Starting and driving 7-25
7
E00653200021
When the operation mode of the power
switch is in ON, operate the drive mode
switch (A) to change the S-AWC drive mode.
E00653300022
Example: “SNOW” mode is selected.
The currently selected drive mode is dis-
played on the multi-information display.
In addition, when the drive mode is changed,
the selected mode appears on the interrupt
display screen of the information screen in
the multi-information display.
The drive mode display will appear on the
information screen for a few seconds, and
then the original screen will return.
E00623101347
The S-AWC operation status can be displayed
on the information screen in the multi infor-
mation display.
To display the status, press the multi informa-
tion display switch to change the information
screen.
Refer to “Information screen (when the oper-
ation mode in ON)” on page 6-9.
The S-AWC operation status is displayed.
Drive mode switch
CAUTION
 Use tyres of the same specified size, same
type, same brand and no wear difference. If
tyres of different size, type, brand and degree
of wear are used, a warning of EV system
abnormality may be displayed.
NOTE
 Even if the S-AWC drive mode is selected,
after turning the operation mode of the
power switch OFF and turning to ON again,
the S-AWC drive mode is set to “NOR-
MAL”.
 The drive mode can be switched while driv-
ing or stopped.
S-AWC drive mode display
S-AWC operation display
NOTE
Display example
Yaw control function display
The amount of the yaw moment is displayed
as a bar graph.
A,D- Clockwise yaw moment about the
vehicle’s center of gravity
B,C- Counterclockwise yaw moment about
the vehicle’s center of gravity