Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 71 / 403

Keyless entry system
4-4 Locking and unlocking
4
Press the UNLOCK switch (2). All the doors
and the tailgate will be unlocked. If the doors
and tailgate are unlocked when the front room
lamp switch is in the “DOOR” position or the
rear room lamp switch is in the middle (
 )
position, the room lamp will illuminate for
approximately 15 seconds and the turn-signal
lamps will blink twice.
The position and tail lamps can also be set to
turn on for approximately 30 seconds. Refer
to “Instruments and controls: Welcome light”
on page 6-60.
To unlock
NOTE
 For the operation of the Electric tailgate
switch (3), refer to “Electric tailgate” on
page 4-18.
 For the operation of the Charging timer can-
cel switch (5), refer to “MITSUBISHI
Remote Control” on page 3-20.
 The door and tailgate unlock function can be
set so that only the driver’s door unlocks
when the UNLOCK switch (2) is pressed
once.
If the door and tailgate unlock function is set
to work as described above, all the doors and
the tailgate unlock when the UNLOCK
switch is pressed two times in succession.
Refer to “Setting of door and tailgate unlock
function” on page 4-5.
 If the UNLOCK switch (2) is pressed and
any of the doors or tailgate is not opened
within approximately 30 seconds, relocking
will automatically occur.

If either of the following problems occurs,
the battery may be exhausted.
• The remote control switch is operated at the
correct distance from the vehicle, but the
doors and tailgate are not locked/unlocked
in response.
• The indicator lamp (4) is dim or does not
come on.
For further information, please consult your
MITSUBISHI MOTORS Authorised Ser-
vice Point.
If you replace the battery yourself, refer to
“Procedure for replacing the remote control
switch battery” on page 4-6.
 It is possible to modify functions as follows:
For further information, please contact your
MITSUBISHI MOTORS Authorised Service
Point.
On vehicles equipped with the Smartphone-
link Display Audio (SDA), screen operations
can be used to make the adjustment.
Refer to the separate owner’s manual for
details.
• The time for automatic relocking can be
changed.
NOTE
• The confirmation function (blinking of the
turn-signal lamps) can be set to operate
only when the doors and tailgate are locked
or only when the doors and tailgate are
unlocked.
• The confirmation function (this indicates
locking or unlocking of the doors and tail-
gate with the blink of the turn-signal lamps)
can be deactivated.
• The number of times the turn-signal lamps
are blinked by the confirmation function
can be changed.

The outside rear-view mirrors automatically
retract or extend when the doors are locked
or unlocked using the remote control
switches of the keyless entry system.
Refer to “Starting and driving: Outside rear-
view mirrors” on page 7-9.
 The keyless entry system does not operate in
the following conditions:
• The operation mode is not in OFF.
• The LOCK switch (1) is pressed while a
door or the tailgate is open.

The remote control switch will operate
within approximately 4 m from the vehicle.
However, the operating range of the remote
control switch may change if the vehicle is
located near a power station, or radio/TV
broadcasting station.
 If your remote control switch is lost or dam-
aged, please contact your MITSUBISHI
MOTORS Authorised Service Point for a
replacement remote control switch.
NOTE