Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 262 / 403

Adaptive Cruise Control System (ACC)*
Starting and driving 7-59
7
The set speed increases by 1 km/h every time
you push up the “RES +” switch while the
ACC control is working. If you hold the
switch pushed up, the set speed increases in
5 km/h increments.
When the accelerator pedal is depressed
while driving with the ACC control working,
you can accelerate the vehicle temporarily
beyond the presently set speed.
At the point where the vehicle speed is raised
to your desired speed, push down and release
the “SET -” switch; the new speed is then set
in the system.
There are two ways to decrease the set speed.
By using the “RES +” switch:
CAUTION
 The setting speed should be set up the suita-
ble speed according to a situation.
NOTE
 There is some time lag between the setting to
a new speed and actually accelerating to that
speed.
 Speed setting operation is possible even in
presence of a vehicle in front. In this case,
however, the set speed alone increases with-
out actual acceleration taking place.
 When the switch is held pushed, a buzzer
sounds every time the set speed changes.
By using the accelerator pedal:
CAUTION
 The ACC braking control and proximity
alarm functions will not work while the
accelerator pedal is depressed.
NOTE NOTE
 The set speed indication on the display turns
to “---” when the accelerator pedal is
depressed. This indication remains as long as
the pedal is in a depressed position.

The ACC control at the original set speed
resumes as soon as you release the accelera-
tor pedal. Under certain conditions, however,
the braking control and alarming functions of
the ACC may not work for a short while after
releasing the accelerator pedal.
 Set speed adjustment is impossible while the
accelerator pedal is in a depressed position.
To decrease the set speed