Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 112 / 403

Seat belts
Seat and seat belts 5-11
5
[For the front passenger]
If the operation mode of the power switch is
put in ON while a seat belt is not fastened, the
warning lamp comes on and the tone sounds
for about 6 seconds to remind the driver and
the front passenger to fasten the seat belt.
If the vehicle is driven with the seat belt still
unfastened, the warning lamp will blink and
the tone will sound intermittently until the
seat belt is fastened. At the same time, “FAS-
TEN SEAT BELT” is displayed on the infor-
mation screen in the multi information
display for the driver.
E00405000420
The seat belt anchor height can be adjusted.
Move the seat belt anchor down with the lock
knob (A) depressed. To move the anchor up,
slide it without depressing the lock knob (A).
WARNING
 Do not install any accessory or sticker that
makes the lamp difficult to see.
NOTE
 If the seat belt subsequently remains unfas-
tened, the warning lamp and the tone will
issue further warnings each time the vehicle
starts moving from a stop.

For the front passenger seat, the warning
function works only while a person is sitting
on the seat.
 When luggage is placed on the front passen-
ger seat, a sensor in the seat cushion may,
depending on the weight and position of the
luggage, cause the warning tone to sound
and the warning lamp to come on.
Adjustable seat belt anchor
(front seats)
WARNING
 When adjusting the seat belt anchor, set it
at a position that is sufficiently high so
that the belt will make full contact with
your shoulder but will not touch your
neck.
Anchor down Anchor up