Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 188 / 403

Combination headlamps and dipper switch
Instruments and controls 6-55
6
 If the operation mode of the power switch
is put in OFF or ACC while the lamp
switch is in the “
” position, the lamps
will turn off automatically when the
driver’s door is opened.
 If the operation mode of the power switch
is put in OFF or ACC while the lamp
switch is in the “
” position, the lamps
will remain on for about 3 minutes while
the driver’s door is shut and will then
automatically turn off.
1. Turn the lamp switch in the “OFF” posi-
tion while the operation mode of the
power switch is in OFF or ACC.
2. Turn on the lamps with the switch in the
“ ” or “ ” position again, then the
lamps will remain on.
E00538101041
This warning lamp will illuminate when there
is a fault in the LED headlamps. Also, “LED
HEADLIGHT SERVICE REQUIRED” is
displayed on the information screen in the
multi information display for the driver.
NOTE
 The sensitivity of the automatic on/off con-
trol can be adjusted. For further information,
contact a MITSUBISHI MOTORS Author-
ised Service Point.
On vehicles equipped with the Smartphone-
link Display Audio (SDA), screen operations
can be used to make the adjustment.
Refer to the separate owner’s manual for
details.
 When the headlamps are turned off by the
automatic on/off control with the operation
mode in ON, the front fog lamps also go off.
When the headlamps are subsequently turned
back on by the automatic on/off control, the
front fog lamps also come on.
 Do not cover the sensor (A) for the automatic
on/off control by affixing a sticker or label to
the windscreen.
 If the lamps do not turn on or off with the
switch in the “AUTO” position, manually
operate the switch and we recommend you to
have your vehicle checked.
Lamps (headlamps, fog lamps,
etc.) auto-cutout function
NOTE
 The lamp auto-cutout will not function when
the lamp switch is in the “
” position.
 The lamp auto-cutout function can also be
disabled.
For further information, we recommend you
to consult a MITSUBISHI MOTORS
Authorised Service Point.
On vehicles equipped with the Smartphone-
link Display Audio (SDA), screen operations
can be used to make the adjustment.
Refer to the separate owner’s manual for
details.
When you want to keep the lamps
on:
LED headlamp warning lamp
*