Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 113 / 403

Seat belts
5-12 Seat and seat belts
5
E00405201184
The rear-centre 3-point type seat belt must be
worn correctly as illustrated.
1. Pull out the buckle (C) from the seatback.
2. Pull out the small latch plate (A) and then
pull out the latch plate (B) by tilting it as
shown in the illustration.
3. Pull the seat belt and insert the small latch
plate (A) into the buckle (C).
4. Insert the latch plate (B) into the buckle
(D).
5. Pull the belt slightly to adjust slackness as
desired.
Rear-centre 3-point type seat
belt
WARNING
 Be sure to securely connect the both latch
plate (A and B). Failing to do so could sig-
nificantly reduce the amount of protection
and cause serious injures in a collision or a
sudden stop.
NOTE

If the seat belt buckles in the rear seating
position are not found, you will find them
under the rear seat cushion.
Refer to “Making a luggage area” on page
5-6 for how to put the seat belt buckles at the
proper position.
To fasten
NOTE
 Pulling out the latch plate by force may dam-
age the headliner.