Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 346 / 403

Tyre repair kit
For emergencies 9-11
9
12. After injecting the sealant, securely fit the
valve remover (E) into the end of the filler
hose (J) to prevent sealant from leaking
from the empty bottle.
13. Pull out the compressor hose (K) from the
side of the tyre compressor, and then
securely attach the hose to the tyre valve
(D).
14. Place the compressor (L) with its air pres-
sure gauge (M) on top.
Pull out the compressor’s power cord (N),
insert the plug on the cord into the ciga-
rette lighter (O), and then put the opera-
tion mode of the power switch in ACC.
(Refer to “Cigarette lighter” on page
8-18.)
Turn ON the compressor switch (P) and
inflate the tyre to the specified pressure.
(Refer to “Tyre inflation pressures” on
page 11-10.)
CAUTION
 The supplied compressor is designed only
for inflation of your vehicle tyres.
 The compressor is designed to run on a vehi-
cle’s 12 V power supply. Do not connect it to
any other power source.
 The compressor is not waterproof. If you use
it in rain, make sure water does not get on it.
Type 1 Type 2