Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 339 / 403

Engine overheating
9-4 For emergencies
9
7. Start the engine in the vehicle which has
the booster battery, let the engine idle a
few minutes, then start the Plug-in Hybrid
EV system in your vehicle.
8. Check that the ready indicator illuminates.
If the ready indicator does not illuminate,
contact a MITSUBISHI MOTORS
Authorised Service Point.
9. When the ready indicator illuminates, dis-
connect the jumper cables in the reverse
order of connection.
10. Check that the select position can be
shifted to all positions other than the “P”
(PARK) position.
11. Have the auxiliary battery inspected by
your nearest MITSUBISHI MOTORS
Authorised Service Point.
E00800604191
When the engine is overheating, the warning
display will appear on the information screen
in the multi information display.
Warning display
If this occurs, take the following corrective
measures:
1. Stop the vehicle in a safe place.
2. Check whether steam is coming from the
engine compartment.
[If steam does not come from the engine
compartment]
WARNING
 When connecting the jumper cables, do
not connect the positive (+) cable to the
negative (-) terminal. Otherwise sparks
might cause explosion of the battery.
CAUTION
 Use care not to get the jumper cable caught
in the cooling fan or other rotating part in the
engine compartment.
NOTE
 If the jumper cable is connected to the any
position other than appointed position, it
may could cause damage to the vehicle.
CAUTION
 Your vehicle is equipped with an exclusive
auxiliary battery. Even if the battery type is
the same, the battery may not be correctly
installed in your vehicle. When replacing the
auxiliary battery, request a MITSUBISHI
MOTORS Authorised Service Point to do so.
Engine overheating