Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 292 / 403

Reversing sensor system*
Starting and driving 7-89
7
Back sensor (vehicles without a towbar)
Back sensor (vehicles with a towbar)
E00615801374
The detection areas can be changed as fol-
lows:
While the operation of the system is stopped
at the “SONAR” switch, push the “SONAR”
switch approximately 3 seconds or more, and
release it. The buzzer sounds twice to indicate
that the detection area has been changed.
While the operation of the system is stopped
at the “SONAR” switch, push the “SONAR”
switch approximately 3 seconds or more, and
release it. The buzzer sounds once to indicate
that the detection area has been changed.
E00615901766
In case there is a malfunction in the reversing
sensor system, the display for the malfunc-
tioning sensor will blink and the warning
buzzer will sound for approximately 5 sec-
onds.
Vehicle to obstacle
distance
Warning dis-
play/sound cycle
Approx. 125 to 80
cm
Intermittent
Approx. 80 to 40 cm Fast intermittent
Within approx. 40
cm
Continuous
Vehicle to obstacle
distance
Warning dis-
play/sound cycle
Approx. 125 to 100
cm
Intermittent
Approx. 100 to 60
cm
Fast intermittent
Within approx. 60
cm
Continuous
CAUTION

The distances given are to be used for refer-
ence only, as errors may be caused by vari-
ous factors, such as temperature, humidity,
or the shape of the obstacles.
NOTE
 When the sensors are detecting different
obstacles at the same time, the information
screen in the multi information display indi-
cates the directions of the obstacles each sen-
sors are detecting. However, closer obstacles
are given priority over other detected obsta-
cles and the warning buzzer sounds to inform
you of closer obstacles.
Changing the detection areas
Vehicles with a towbar
Vehicles without a towbar
NOTE
 The detection area will not change if you
keep the “SONAR” switch pushed for 10
seconds or more.
Reversing sensor system warn-
ing display
Example: Corner sensor (left) malfunctioning