Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 317 / 403

Automatic climate control air conditioner
8-10 For pleasant driving
8
E00739600295
Functions can be changed as desired, as
stated below.
 Enable automatic air selection control
When the AUTO switch is pressed, the air
selection switch is also controlled auto-
matically.
 Disable automatic air selection control
Even when the AUTO switch is pressed,
the air selection switch is not controlled
automatically.
 Setting change method
Hold down the air selection switch for
about 10 seconds or more.
• When the setting is changed from enable
to disable
3 sounds are emitted and the indicator
lamp (A) flashes 3 times.
• When the setting is changed from disa-
ble to enable
2 sounds are emitted and the indicator
lamp (A) flashes 3 times.
On vehicles equipped with the Smart-
phone-link Display Audio (SDA), screen
operations can also be used to change the
setting. Refer to the separate owner’s
manual for details.
E00702601252
When the AUTO switch is pressed, the indi-
cator lamp (A) comes on and the mode selec-
tion,
blower speed adjustment,
recirculated/outside air selection, temperature
adjustment, and air conditioner ON/OFF sta-
tus are all controlled automatically.
NOTE
 Normally, use the outside position to keep
the windscreen and side windows clear and
quickly remove fog or frost from the wind-
screen.
If high cooling performance is desired, or if
the outside air is dusty or otherwise contami-
nated use the recirculation position. Switch
to the outside position periodically to
increase ventilation so that the windows do
not become fogged up.

When the engine coolant temperature rises to
a certain level, the air selection is automati-
cally switched to the recirculation position
and the indicator lamp (A) comes on. At this
time, the system will not switch to the out-
side position even if the air selection switch
is pushed.
 When the outside air temperature is high, the
system will not switch to the outside position
even the air selection switch is pressed if the
air conditioner is operating. This is to protect
the air conditioner compressor and is not a
failure.
 Customising the air selection
NOTE
 The factory setting is “Enable automatic air
selection control”.
 When the demister switch is pressed, in
order to prevent misting of the windows the
ventilator automatically switches to outside
air even if “Disable automatic air selection
control” is set.
AUTO switch
NOTE