Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 114 / 403

Seat belts
Seat and seat belts 5-13
5
1. Hold the latch plate and push the button
on the buckle.
2. After the seat belt is retracted completely,
insert the latch plate (B) into the upper slit
(F), and then insert the small latch plate
(A) into the lower slit (G).
3. Store the seat belt buckle in the storage
pocket.
(Refer to next column.)
E00405301521
When the seat belt is not in use, store it as
shown in the illustration.
After passing the belt through the rear notch
(A), insert the plate into the front notch (B).
To unfasten
NOTE
 As the belt retracts automatically, keep the
latch plate held while retracting so that the
belt stows slowly. Failure to do this could
damage the vehicle.
 To release the buckle (C), press the button
(E) with a narrow-tipped object (latch plate
or mechanical key etc.).
Rear seat belt storage
Seat belt plate storage
Outboard seating position