Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 96 / 403

Security alarm system
Locking and unlocking 4-29
4
E00312101504
The vehicle inclination detection function and
the interior intrusion detection function can
be deactivated when parking in automated car
parks or leaving pets in the vehicle or leaving
the vehicle with the windows slightly open.
1. Put the operation mode in OFF.
2. Raise and hold the wiper and washer
switch to the “MIST” position for about 3
seconds. The buzzer will sound twice and
the function will be deactivated.
To activate the function again, raise and hold
the wiper and washer switch to the “MIST”
position for about 3 seconds.
The buzzer will sound once and the function
will be activated.
E00301802508
The following methods can be used to cancel
the system when it is in the system prepara-
tion mode or the system armed mode.
 Pressing the UNLOCK switch on the
remote control switch.
 Putting the operation mode in ON.
 Opening any one of the doors or the tail-
gate, when the system is in the system
preparation mode.
 Holding the keyless operation key and
pressing the driver’s or front passenger’s
door lock/unlock switch, or the tailgate
open switch to unlock the doors and the
tailgate.
To deactivate the vehicle inclina-
tion detection function and the
interior intrusion detection func-
tion
*
NOTE
 The function will be activated again if the
following operation is performed.
• If the doors and the tailgate are unlocked
using the keyless entry system or the key-
less operation function.
• If the operation mode is put in ON or ACC.
Cancelling the system
NOTE

If the bonnet is opened during the system
preparation mode, the system preparation
mode is suspended.
The system returns to the system preparation
mode when the bonnet is closed.
 If the auxiliary battery terminals are discon-
nected while the system is in the system
preparation mode, the memory will be
erased.
 It is possible to register up to four remote
control switches for keyless operation sys-
tem.
As long as they are registered, any of the
remote control switches, other than the one
used to activate the system, can be used to
cancel the system.
If you want to register additional remote
control
switches, please contact a
MITSUBISHI MOTORS Authorised Service
Point.