Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 190 / 403

Combination headlamps and dipper switch
Instruments and controls 6-57
6
E00538200117
The Automatic High Beam (AHB) switches
the headlamp beams (high/low) when the sen-
sor (A) senses a illuminant such as lights of a
vehicle in front or oncoming vehicle or a
street lamp.
E00551500377
1. Rotate the lamp switch to “ ” position
or “AUTO” position when the Plug-in
Hybrid EV System is operating.
2. Press the AHB switch.
The AHB is activated and the indicator
will illuminate.
If the AHB switch is pressed again, the
AHB will be deactivated and AHB indica-
tor will go off.
1. Pull the turn signal lever toward you.
2. The AHB indicator will go off.
3. The AHB switch is pressed again, the
AHB will activated.
1. Pull the turn signal lever toward you.
2. The AHB indicator will go off and the
high beam indicator illuminates.
Automatic High Beam (AHB)
*
WARNING

The headlamp beams (high/low) may not
be switched automatically under certain
circumstances. Do not overestimate the
system. It is the responsibility of the
driver to switch the headlamp beams
(high/low) manually to suit each driving
condition.
Refer to “Dipper (High/Low beam
change)” on page 6-56.
How to use the AHB
NOTE
 If the headlamps are on when the lamp
switch is in the “AUTO” position, the AHB
works.
 You can switch the headlamp beams
(high/low) manually by operating the lever
even if the AHB is working.
Refer to “Dipper (High/Low beam change)”
on page 6-56.
If the lever is operated manually, the AHB
indicator will go off and the AHB will be
deactivated.
Refer to “Manual switching” on page 6-57
 The AHB is not deactivated when you pull
the lever slightly (operation of the headlamp
flasher).
 Manual switching
Switching to low beam
Switching to high beam