Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 59 / 403

MITSUBISHI Remote Control
3-22 Charging
3
WARNING
 Do not use the MITSUBISHI Remote
Control if children, persons in need of
care, pets, etc. are in the vehicle. Even if
the remote climate control is used, the
cabin may become hot or cold due to some
reasons such as automatic stop of the sys-
tem. The cabin temperature may quickly
rise in sunshine, which poses a risk of heat
stroke and dehydration. In cold weather,
on the other hand, the cabin temperature
may quickly drop. Either of which could
lead to death in the worst case.
In addition, children can activate switches
and controls, resulting in an injury or
fatal accident.
 The cooling fan in the engine compart-
ment may operate automatically when
charging or when operating air condi-
tioner. Do not bring your hand close to the
cooling fan during charging.
CAUTION
 Do not use a car cover except for the
MITSUBISHI MOTORS GENUINE car
cover, when using the charging timer or the
remote climate control.
NOTE
 When ownership of the vehicle is transferred
to or from others, it is necessary to initialize
the registration of MITSUBISHI Remote
Control.
For the registration initialization procedure,
please visit our web site.
https://www.mitsubishi-motors.com/en/
products/outlander_phev2/app/remote/

Keep the following points in mind when
using a wireless LAN device:
• Communication speed and range vary
depending on the wireless LAN devices and
the surrounding conditions (radio environ-
ment, obstacles, parking area environment,
etc.).
• Due to the characteristics of radio waves,
communication speed tends to decrease as
the communication distance increases. Use
your wireless LAN device at a short dis-
tance from the vehicle for better response.
• When a microwave oven or ISM (indus-
trial, scientific and medical) equipment is
being used, the communication speed and
range of wireless LAN devices may
decrease. Use your wireless LAN device
away from these appliances and equipment.
• If a wireless LAN device and Bluetooth
(registered trademark of Bluetooth SIG,
Inc.) are used simultaneously, the commu-
nication speed and range of each device
may decrease. Use your wireless LAN
device away from Bluetooth devices.
 Wireless LAN devices may not communicate
with the vehicle, or may not operate nor-
mally or stably in the following environment
or situations. Check that the device can com-
municate with your vehicle before use.
• There is an obstruction such as a concrete
or metal wall between the vehicle and wire-
less LAN device.
• The vehicle is surrounded by tall vehicles
in a parking lot.
• There are facilities nearby that emit strong
radio waves, such as a TV tower, trans-
former substation, broadcasting station or
airport.
• There is a communication device such as a
mobile phone or radio, or an electric device
such as a personal computer near the wire-
less LAN device.
• The wireless LAN device is in contact with
or covered by a metal object.
• The battery of the wireless LAN device has
run down.

The MITSUBISHI Remote Control cannot
be used under the following conditions:
• The wireless LAN device is turned off.
• The MITSUBISHI Remote Control appli-
cation software is not installed.
• The MITSUBISHI Remote Control appli-
cation software is not running.
• The wireless LAN device is not registered
on the vehicle or it is not connected to the
vehicle.
NOTE