Mitsubishi MOTORS OUTLANDER PHEV 2021, Owner'S Manual

Page: 259 / 403

Adaptive Cruise Control System (ACC)*
7-56 Starting and driving
7
E00634801054
E00634901143
• When water, snow or sand on the road are
extorted by the vehicle in front or an
oncoming vehicle*.
*: After the ACC control has been cancelled
automatically due to detection of a state of
decline in performance, the ACC will not
operate in the temporary condition and will
inform the driver by buzzer and indication.
When the ACC is in the state in which it can
operate, indication is cancelled.
Should indications not cancel there is a pos-
sible abnormality in the system.
Please contact a MITSUBISHI MOTORS
Authorised Service Point.
Cruise control switch
1- “ACC ON/OFF” switch
Used to turn on and off ACC or the
cruise control function.
CAUTION
2- “SET -” switch
Used to set a desired speed and to
reduce the set speed.
3- “RES +” switch
Used to make ACC operate at the origi-
nally set speed and also to increase the
set speed.
4- “CANCEL” switch
Used to cancel the control function of
ACC or the cruise control.
5- ACC distance switch
Used to change the setting of the fol-
lowing distance between your vehicle
and a vehicle in front.
NOTE
 Operate the individual switches correctly and
one after another.
The ACC may be turned off or its control
function may be cancelled if two or more
switches are pressed concurrently.
Driving aid display
1- ACC indicator:
Indicates that the ACC is ON.
2- Control state indicator:
Indicates that the ACC is active.
3- Set speed:
Indicates the target speed.
4- Vehicles in front symbol:
Comes on when the radar detects a
vehicle ahead. Two types of indication;
“Stand by” and “Active”
Display
State
Stand by Active
Vehicle in
front
detected