MIMAKI cg-100AP, Instruction Manual

Page: 105 / 180

CHAPTER 2
BASIC OPERATION
2-35
OPERATION END
The operation after completion to produce the pattern paper shall be achieved as follows.
1 Remove the paper from the UNIT.
When a daily operation is completed,
remove the paper from the UNIT, and
lift the paper set lever at the UP
position without fail.
• The roll paper just leave on
the roll holder for next opera-
tion.
2 Remove the magazine from the
UNIT.
Hold the magazine shaft, and
steadily lift up.
3 Remove the tools from the removed
m a g a z i n e .
If the pen is left in the magazine, it
may well be dried off and become
impossible to write. Therefore, firmly
put a cap and store it in such as
a c c e s s o r y b o x .
• The mechanical pen and
cutter can be left on the
magazine.