MIMAKI cg-100AP, Instruction Manual

Page: 142 / 180

4-6
STATUS DISPLAY OF SIGNAL LINES
The function to execute a real time display of the signal lines under the online plot out, dump and loop back
shall be turned ON/OFF.
•CD (DCD)
•ER (DTR)
•RS (RTS)
•CS (CTS)
•DR (DSR)
ON/OFF of ER and RS is not monitor of the host computer signal, but the signal to notice from the plotter to the
host computer.
This setting will remain effective until the power is turned OFF.
• Under the line monitor mode, when an error is detected, the error mes-
sage will not be displayed. However, if the buzzer is turned ON, the
buzzer alarms the error. Chapter 3 "BUZZER SETTING" (P.3-20).
1 Under the offline mode, the fifth
page of the menu will be displayed.
2 Select ON/OFF of [LINE MONI-
TOR]. The ON/OFF will be
changed over whenever the key is
p r e s s e d .
-F3+
: ON, OFF
3 Execute the online plot out, dump,
loop back and so forth.
The display under the line monitor
ON shall be as follow
-PAGE+
<--SELFTEST PRM-LIST-->
<--LINE : OFF DUMP-->
LINE) CD : XXX ER : XXX
RS : XXX CS : XXX DR : XXX