MIMAKI cg-100AP, Instruction Manual

Page: 123 / 180

CHAPTER 3
APPLIED FUNCTIONS
3-15
AUTO FEED SETTING
Establish a length and timing of feeding a roll paper at the time of paper loading.
This operation enables a weaved roll feeding to be detected in advance. Establish the condition in accordance
with the data length.
This setting shall be stored in memory regardless turning the power ON or OFF.
• Select a setting that is larger than the paper length contained in data to be
output.
1 The third page of the menu will be
displayed under the offline mode.
2 Select [AUTO FEED].
3 Change the [FEED LNG] and[FEED].
-F1
: 3.0 ---> 0.0m (0.5 step)
F1+
: 3.0 ---> 9.5m (0.5 step)
-F3+
: AT PAPER LOAD, AT PLOT START
4 Register the auto feed.
• There is a function to detect a slippage before the paper is slipped off
from the pinch roller. Input the value of [SKEW] in the process of "SYS-
TEM SETTING" (P.3-27) in this chapter. The slippage over (5 - 15mm) at
the right end of the paper between the first paper load and the second
paper load causes an error.
-F2+
FEED LNG : X. Xm
FEED : AT PAPER LOAD
END
<--SCALE AUTO FEED-->
<--COMPEN DIST-CMP-->
<--SCALE AUTO FEED-->
<--COMPEN DIST-CMP-->
-PAGE+