MIMAKI cg-100AP, Instruction Manual

Page: 73 / 180

CHAPTER 2
BASIC OPERATION
2-3
PREPARATION OF PAPER AND THE TOOLS
Prepare the paper to produce pattern paper and the tools necessary for the work. Although the installation to the
UNIT shall be accomplished immediately before the plot out, confirm at this time before starting the work.
Preparation of Paper
Use of Roll Paper
Refer to "Load of Roll Paper" (See page2-4.) for the roll paper, and install on the main unit.
Use of Leaf Paper
It is necessary to adapt the paper unpacked and removed from the packing box to the ambient
temperature and humiditiy in the room.Put the paper on a flat table and leave in the atmosphere
for 30 minutes and over.
Setting the leaf paper onto the UNIT shall be accomplished immediately before starting the plot
out work.