MIMAKI cg-100AP, Instruction Manual

Page: 72 / 180

2-2
HOW TO PLOT OUT PATTERN PAPER
Apply the following procedures for the plot out of the pattern paper.
1 Preparation of Paper and the Tools
Preparation of Paper and the Tools See page 2-3.
2 Set-up of Plotter
Power Supply to Plotter See page 2-7.
Selection of the Tools Operation Mode See page 2-8.
Setting of the Tools Condition. See page 2-10.
Tool up Speed Setting See page 2-14.
Dotted Line Cut Setting See page 2-15.
Sorting Settin See page 2-16.
Autocut Setting See page 2-18.
3 Set of Paper and the Tools onto Plotter
Installation of Magazine See page 2-20
Paper Setting
Set of roll paper See page 2-25
Set of leaf paper See page 2-29
• Accomplish the self diagno-
sis function so as to confirm
the tools condition, and no
failure may be expected. (See
page 4-2)
4 Plot Out
Transmission of Data from Host Computer See page 2-31
5 Operation End
End the operation. See page 2-35