MIMAKI cg-100AP, Instruction Manual

Page: 168 / 180

6-8
I t e m S p e c i f i c a t i o n
Media size Roll paper: Width 1,020 - 594mm (Roll max Outter Diametr
180mm and below
Leaf paper (JIS): A3, A2, A1, A0
Media thickness 55g/m2 basis - 110g/m2 basis
Max plotting area Roll paper: Width 30mm from inside of both sides pinch rollers
Length 3000mm
Leaf paper: 811 x 1135mm
Accuracy in distance 0.2mm or 0.1% of specified distance, whichever larger
Perpendicularity ± 0.2mm/300mm
Reproduceability Without exchange of pen:0.15mm
With exchange of pen:0.3mm
Program step 0.025mm, 0.05mm, 0.01mm
Maximum speed 120cm/s (Axial direction: 85cm/sec), When a roll of paper is used,
the maximum speed will be 60 cm/s.
Maximum acceleration 5.7G (Axial direction: 4G)
Maximum pressure 15 - 450g
Maximum offset 2.50
Number of pens/cutters tool type automatically recognized
Maximum Lead quantity per 0.2mm : 120ea (Option)
mechanical pen 0.3mm : 70ea
0.4mm : 45ea(Option)
0.5mm : 30ea
Type of pen Ink pen, plastic pen, ceramic pen, pressurized ball pen, water ball
pen, dedicated sharp pen, cutter (dedicated)
Command MGL-ll C (command in compliance with HP-GL)
Interface Serial interface in compliance with RS-232C
Parallel interface in compliance with Centronics (factory option)
Receiving buffer 448KB, 1472KB (factory option)
Outside diameter (W)x(D)x(H) 1,521mm x 1,000mm x 1,106mm (Under paper bascket open)
Weight 72.5Kg
Operation environment Temperature: 5 - 40 ° C
Humidity: 35 - 75% (Rh) without dew condensation
Accuracy assurance Temperature: 15 - 25 ° C
environment Humidity : 35 - 75% (Rh) without dew condensation
Power AC100 - 20V, 50/60Hz, 1.5A and below
AC200 - 240V, 50/60Hz, 0.75A and below (Either one has to be
selected according to the exfactory SPEC)
Noise 70dB (A)
SPECIFICATION FOR MAIN UNIT