14140 NE 200th St.
Woodinville, WA. 98072
(425) 398-8282
Remove the Bottom Cover
Logic Board Replacement
For FJ8 apparel plotter
1
Power off and unplug the data
and power cables.
Unplug the take-up motor cable
from the bottom right side of
the machine.
Remove the ‘Rear Stand Screws’
on the rear of the machine.
These hold the printer on the
stand (do not remove the front
screws).
Make sure the stop screws are
installed on the take-up plate
on both sides of the machine.
Take-Up Motor Cable
Rear Screw (Left Side)
Rear Screw (Right Side)
Front Screw
(DO NOT REMOVE)
Front Stop Screw
(DO NOT REMOVE)
P/N: 108854 R0
