Mercedes-Benz 2006 CL-Class, Owner'S Manual

Page: 253 / 555

232
Controls
Seats
Make sure the key is in position 1 or 2
in the ignition lock or that the respec-
tive door is open.
Head restraint height
Higher or lower: slide switch 1 up or
down.
i
The head restraint height is automatically
adjusted relative to the seat fore-and-aft adjust-
ment.
i
The head restraint of the front-passenger
seat automatically moves to its lowermost posi-
tion while the vehicle is in motion if the seat is
unoccupied. You will then have a better all round
view.
Seat height
Slide switch 2 up or down in the direc-
tion of the arrow.
Seat cushion angle
Up or down: slide switch 3 up or
down in the direction of the arrow until
your thighs are lightly supported.
Seat cushion length
Forwards or backwards: slide switch
4 left or right in the direction of the ar-
row.
Seat fore-and-aft adjustment
Forwards or backwards: slide
switch 5 to the left or right.
i
The head restraint height is automatically
adjusted relative to the seat fore-and-aft adjust-
ment.
Backrest angle
Slide switch 6 left or right in the direc-
tion of the arrow.
Head restraint angle
Grasp the top of the head restraint and
pull it forwards or push it backwards.
Lumbar support
You can adjust the lumbar support using
COMAND ( page 216).
Multi-contour seat*
You can set the characteristics of the mul-
ti-contour seat for the driver and front pas-
senger using COMAND ( page 216).
P91.16-2446-31
G
Risk of injury
Make sure that the back of your head is sup-
ported at about eye level by the centre of
the head restraint. This will reduce the risk
of injury to your head and neck in the event
of an accident or similar situations.
Never travel without a correctly adjusted
and engaged head restraint.
216_RE_2006-12a.book Seite 232 Montag, 2. Oktober 2006 12:06 12