Mercedes-Benz 2006 CL-Class, Owner'S Manual

Page: 162 / 555

141
COMAND
COMAND navigation system* (introduction)
Display options with geo-coordinate
display switched on
If the crosshair is displayed on the map
view (map was moved manually), only dis-
play 3 is visible. It shows either the coor-
dinates of the crosshair or other data on
the crosshair position, e.g. a street name.
The digital map must contain relevant data
in order for this other data to be displayed.
i
If there is no crosshair on the map view,
displays 1 , 2 and 3 are visible. Display 3
shows the coordinates of the current vehicle
position.
Switching the geo-coordinate display on
or off
Select "Navi" "Navi" "Map dis-
play" .
The map display list appears.
Select
"Geo-coordinates" .
The geo-coordinate display is switched
on or off, depending on the previous
status. A filled square indicates the
active status.
To exit the menu: slide o m p .
Selecting the route type
You can select the following route types:
"Fastest route" : COMAND calculates a
route with the shortest possible (mini-
mised) journey time.
"Dynamic route" : same route type as
"Fastest route" . However, COMAND
also takes into consideration any RDS-
TMC traffic announcements
1
that are
received for route guidance. The navi-
gation system is thus able to guide you
around a traffic jam, for example. If
a quicker route is determined due to a
received RDS-TMC traffic announce-
ment, the navigation system changes
the route. It will bypass blockages if
possible.
"Short route" : COMAND calculates a
route with the shortest possible (mini-
mised) distance.
Select "Navi" "Navi" "Mode" .
The mode list appears. A R dot indi-
cates the current setting.
To adjust: select "Fastest route" or
"Dynamic route" or "Short route" .
To exit the menu: slide o m p .
i
COMAND calculates a new route if you
change the route type setting with route guid-
ance active.
If you change the route type setting when route
guidance is inactive, COMAND uses the new set-
ting for the next route guidance.
1 RDS-TMC and the "Dynamic route" route type are
not available in all countries.
216_RE_2006-12a.book Seite 141 Montag, 2. Oktober 2006 12:06 12