Mercedes-Benz 2006 CL-Class, Owner'S Manual

Page: 152 / 555

131
COMAND
COMAND navigation system* (introduction)
Updating process
After you have loaded the DVD, you will
see a message to the effect that the disc
does not contain a recognisable audio/
video format.
To confirm the message: press n .
COMAND checks whether the map
software on the DVD is compatible with
the vehicle’s navigation system and
whether it is compatible with the cur-
rent system software.
If map software is not compatible with
the navigation system:
You will see a message that the update is
not possible.
To confirm the message: press n .
COMAND ejects the DVD.
Take the DVD out of slot
1 .
Load a DVD which is compatible with
the vehicle’s navigation system.
If map software is not compatible with
the current system software:
You will see a message that the system
software and the map software are not
compatible.
To confirm the message: press n .
COMAND ejects the DVD.
Take the DVD out of slot
1 .
Have the system software updated at a
Mercedes-Benz Service Centre.
i
The map software cannot be updated until
the system software has been updated.
If map software is compatible with the
navigation system and the current
system software:
COMAND checks whether the map data on
the DVD is already installed.
If map data is already installed:
You will see a message that the map data
is already installed and a prompt will ap-
pear asking you whether you wish to con-
tinue with the update.
Select "Yes" or "No" .
If you select "No" COMAND automati-
cally ejects the DVD and the map data
is not updated.
Take the DVD out of slot 1 .
If you select "Yes" the existing map
data is stored again.
If map data is not installed yet:
You will see a comparison of the version
statuses in the display and a prompt will
appear asking whether you wish to contin-
ue with the update.
Select "Yes" or "No" .
If you select "No" COMAND automati-
cally ejects the DVD and the map data
is not updated.
216_RE_2006-12a.book Seite 131 Montag, 2. Oktober 2006 12:06 12