Mercedes-Benz 2006 CL-Class, Owner'S Manual

Page: 237 / 555

216
COMAND
COMAND seat adjustment
i
The components and operating principles of
COMAND can be found on ( page 59).
The lumbar support in the backrest of the
front seats can be adjusted to provide op-
timum support for your back.
Press the O button.
The main area of the COMAND display
is active. A scale appears.
To move to the lower menu line:
slide q m r
To select the seat: slide o m p or turn
y m z .
To confirm the selection: press n .
i
When you press the O function button,
the previously set seat is active.
To adjust the lumbar support: slide
o m p or turn y m z until the desired set-
ting is reached.
To confirm the selection: press n .
i
The components and operating principles of
COMAND can be found on ( page 59).
The contour of the front seat backrests
can be individually adjusted to provide op-
timum support for your back. This is
achieved by controlling the pressure in the
air chambers in the multi-contour seat.
The adjustments are made using the
COMAND display.
i
When you adjust the multi-contour seat, you
may hear the air being pumped in or released.
You can adjust the following air cushions:
Seat cushion side bolsters
Backrest side cushions
Backrest curvature in the lumbar re-
gion
Backrest curvature in the upper back
region
Make sure the key is in position 2 in the
ignition lock.
Press the
O button.
Selecting the seat
You must first select the seat for which you
wish to make adjustments.
Press the O button.
The main area is active.
To move to the lower menu line:
slide q m r .
COMAND seat adjustment
Lumbar support
P82.86-5022-31
Multi-contour seat*
P82.86-5637-31
216_RE_2006-12a.book Seite 216 Montag, 2. Oktober 2006 12:06 12