Mercedes-Benz 2006 CL-Class, Owner'S Manual

Page: 250 / 555

229
Controls
Key positions
Ignition lock
0 To remove the key
1 Power supply for some consumers, e.g.
the seat adjustment function
2 Ignition (power supply for all consum-
ers) and drive position
3 To start the engine ( page 256)
i
The indicator and warning lamps in the in-
strument cluster light up when you switch on the
ignition. They go out when the engine is running.
This shows that the indicator and warning lamps
for each system are operational.
Pressing the KEYLESS GO button without
depressing the brake pedal corresponds to
the different key positions in the ignition
lock.
The engine starts immediately if you de-
press the brake pedal while pressing the
KEYLESS GO button.
1 KEYLESS GO button
Position 0
The on-board electronics have the
status 0 , the same as the key having
been removed from the ignition lock,
until KEYLESS GO button 1 is pressed.
Position 1
Press KEYLESS GO button 1 once.
The seats can now be adjusted, for ex-
ample.
i
If you now press KEYLESS GO button 1
twice in this position and the driver’s door is
open, the power supply is switched off again.
Position 2 (ignition)
Press KEYLESS GO button 1 twice.
i
If you now press KEYLESS GO button 1
once in this position and the driver’s door is
open, the power supply is switched off again.
Key positions
Key with remote control
P54.25-5003-31
KEYLESS GO*
P80.61-2195-31
216_RE_2006-12a.book Seite 229 Montag, 2. Oktober 2006 12:06 12