Mercedes-Benz 2006 CL-Class, Owner'S Manual

Page: 179 / 555

158
COMAND
COMAND navigation system* (entering a destination)
The left-hand part of the display shows
the destinations on the map. The desti-
nation marked in the list is highlighted
in the map.
To select a destination: select the de-
sired destination from the list.
The address of the destination ap-
pears.
To start route calculation: select
"Start" , see also ( page 154).
Entering another destination as an
intermediate stop
Select "Navi" "Destination" "Stop-
over" .
To enter: select "Other" .
You can select:
"Address input"
"From memory"
"From last destinations"
"From POIs"
Select a menu item.
Subsequent destination input may differ,
depending on your selection:
"Address input" selected:
Entering a destination by address
( page 143).
"From memory" selected:
Entering a destination from the des-
tination memory ( page 154).
"From last destinations" selected:
Entering the destination from the
list of previous destinations
( page 156).
"From POIs" selected:
Entering a special destination
( page 159).
To start route calculation: select
"Start" after you have entered the des-
tination, see also ( page 154).
Changing an intermediate stop
If an intermediate stop has already been
entered, you can change this.
Select "Navi" "Destination" "Stop-
over" "Change stopover" .
Enter another destination as an inter-
mediate stop.
Deleting the intermediate stop
If an intermediate stop has already been
entered, you can delete it.
Select "Navi" "Destination" "Stop-
over" "Delete stopover" .
COMAND deletes the intermediate
stop and calculates the route to the
main destination.
216_RE_2006-12a.book Seite 158 Montag, 2. Oktober 2006 12:06 12