Medrad Mark 7 Arterion, Operation Manual

Page: 99 / 162

16 - 91
16 Installation - System and Accessory
This chapter describes:
• "Unpacking the Injection System"
• "Pedestal Mount Installation"
• "Power Unit Installation"
• "Injector Head Mounting Options"
• "Display Control Unit Mounting Options"
• "Accessory Installation"
NOTE:
All relevant guidelines for institutional, local or national safety recommendations
related to cable routing and installation should be followed.
NOTE:
After installation, it is recommended that an operational checkout be performed.
See
"15.2.3-Performing an Operational Checkout" for more information.
16.1 Unpacking the Injection System
The system is shipped in multiple cartons, with the number of cartons depending on the type of
installation. The major components of the injector system are shipped in two cartons.
Shipper cartons:
• Carton containing the injector head, display and base.
• Carton containing the accessory items/interconnect cables.
Additional Shipper Cartons:
• Carton containing the injector head mounting option, either a Pedestal or Overhead
Counterpoised System (OCS).
NOTE:
Before installing, remove and inspect the contents from each carton and verify that
all components are present. Call Bayer immediately regarding damaged or missing
components.
Mechanical Hazard - Minor or moderate patient and/ or worker injury may result.
• Do not create a trip hazard when routing cables.
• Follow installation procedures including use of proper screws and plugging all unused
holes.
CAUTION
Mechanical Hazard - Minor or moderate worker Injury May Result.
• Use two persons to lift or move heavy or large packaging.
• Visually inspect contents and package before use.
• Do not use if package is damaged.
CAUTION