Medrad Mark 7 Arterion, Operation Manual

Page: 53 / 162

Setting and Managing Protocols
9 - 45
9.2.1.2 Create a New Phased mL/s Protocol on the Protocols tab
Phased protocols consist of multiple phases of Volumes and flow rates with a single pressure limit and
rise time.
NOTE:
ISI does not function with Phased protocols.
1.
Select the Protocols tab.
Figure 9 - 5: Protocols Tab - Phased Protocols
2.
Select the Type (B) button until Phased is highlighted. A list of Phased protocols displays.
NOTE:
If the Phased button on the Protocols tab is not displayed, go to the Options tab to
enable Phased Protocol. See "6.4 - Options Tab" for more information.
3.
Select the blank blue button (A).
NOTE:
If a blank button is not visible, scroll through the list of protocols until one displays.
If a blank button is not available or “0 Available” displays in the upper right corner,
the system cannot store any more protocols. Delete a protocol to add a new one.
4.
Enter the protocol name.
5.
To enter phases:
a.
Select Volume or Flow Rate . Phase 1 displays with default values.
b.
Select Volume or Flow Rate for Phase 1 to modify the settings.