Medrad Mark 7 Arterion, Operation Manual

Page: 127 / 162

Installation - System and Accessory
16 - 119
3.
Ensure the Pedestal Arm has been rotated counterclockwise until you hit the stop.
4.
Locate two DCU Mounting Bracket halves (D).
5.
Orient halves together ensuring each threaded hole lines up with a through hole.
6.
Position the DCU Mounting Bracket around the DCU post so that the bottom is approximately
41 inches from the ground.
7.
Insert and loosely fasten one 1/4-20 x 1-1/4 screw (E) in the hole closest to the Stand Post.
8.
Insert the assembled DCU Support Post into open hole of the DCU Mounting Bracket so that
the stop pin (H) is away from the Stand Post and bottom of the post is flush with the support.
See image below.